DIY Crystal Encrusted Belt

Double-faced satin ribbon (2-3 inches wide)
Sequin patches
1 yard of black felt
Fabric glue
Measuring tape
Measure your waistline, and then add 12 inches to that number. For example, if your waist is 24” around, then you’ll need 36” of ribbon. The added length will allow you to comfortably tie the belt. Now, cut the double-faced satin to that particular length. Lay the black felt on a flat surface in front of you. Arrange the sequin patches in a fashion that you like. Once you’ve found a design that you like, apply the fabric glue to the backs of each patch and adhere them to the felt. Once the patches have completely dried onto the felt, you’ll need to trim the felt. Snip all of the extra felt around the sequin patches off to create a clean, polished look. Once you’ve cut out the sequin/felt design, glue it to the center of the double-faced satin. Let dry for 24 hours before wearing the belt.